How to track the hours
of heavy machinery.

A machine’s hours decide what you invoice, what it costs you and when it’s due for service. Here we explain which types of hours to tell apart, how to record them without relying on paper job sheets and what to do with that data.

In short
  • A machine has three kinds of hours: engine hours (hour meter), effective working hours and billable hours. It’s normal for them to differ; not knowing why isn’t.
  • Record for each machine: hour meter at start and end, site, operator, stoppages with their reason, and fuel.
  • What works best is combining telematics (automatic hours and status) with the operator’s digital job sheet (site, task and stoppages).

Why your machines’ hours don’t add up

The same machine on the same day usually has three different figures:

  • Engine hours (hour meter): the time the engine has been running, idling included.
  • Effective working hours: the time the machine has actually been producing.
  • Billable hours: the hours charged to the customer under the contract or the signed job sheet.

It’s normal for them to differ. The problem is not knowing by how much or why. That’s where idling that burns fuel, hours that never get invoiced and services calculated wrongly hide.

What to record for each machine

  • Hour meter at the start and end of each shift or each site.
  • Site and task it worked on.
  • Operator who ran it.
  • Stoppages and their reason: breakdown, waiting, no work face available or weather.
  • Fuel added, to cross-check it with the hours.

With those five data points you can already work out the real cost per hour, fuel per hour and how much time each machine loses standing still.

Three ways to track them

ProsCons
Paper job sheetCheap and familiar to everyone.Arrives late, gets lost, has to be retyped and depends on what each person writes down.
Excel or a job sheet appData arrives sooner and can be analysed.Still depends on the operator recording the hour meter and stoppages correctly.
TelematicsHours are logged automatically, with the machine’s location and status.Needs the manufacturer’s telematics or fitted hardware, and software to bring it all together.

The usual approach, and the one that works best, is to combine them: telematics provides engine hours and status; the operator’s digital job sheet adds site, task and the reason for stoppages.

How to start in four steps

  1. Decide which hours you need for invoicing, for maintenance and to know the real cost.
  2. Get rid of paper with a digital job sheet on the phone, even a simple one.
  3. Use the data you already have: many modern machines already send it to the manufacturer’s platform.
  4. Bring it all together and check once a week which machines have the most idle hours and the biggest gap between engine hours and invoiced hours.

The mistakes that cost most

  • Scheduling services on invoiced hours instead of engine hours (maintenance software prevents this).
  • Not recording the reason for stoppages: without it you can’t fix them.
  • Checking five different manufacturer portals and cross-checking nothing.
  • Asking the operator to fill in data a machine could record on its own.

When it pays to automate

If you have few machines all working in the same place, a good digital job sheet may be enough. When the fleet grows, machines are from several brands or work spread out, it pays to have a system that combines telematics and job sheets and alerts you to what matters. That’s what we do in remote heavy machinery monitoring.

Sound familiar? See how we solve it in remote machinery monitoring or tell us about your case directly.

Tell us about your case↗

Questions,
on the table.

What is a machine’s hour meter?

The counter that records how long the engine has been running. It’s the usual reference for planning maintenance.

Should engine hours and billable hours match?

They don’t usually match: the engine also counts idling and waiting. What matters is knowing the difference and reducing it.

Do I need to fit hardware on every machine?

Not necessarily. Many modern machines already send data to the manufacturer; hardware is only needed on those that don’t.