Manufacturer or independent telematics:
which one suits you.

Manufacturer telematics gives you the data it decides, on its portal and on its terms. Independent telematics measures what you want, on any brand and also with no coverage. Here we explain what each gives you and when it pays off, even with a single machine.

In short
  • The manufacturer’s tells you what the manufacturer decided to tell you. Independent telematics measures practically whatever you want.
  • Even one machine can make it pay off: it depends on what the machine is worth, what a stoppage costs and what you need to see.
  • It can be designed to work with no coverage, even on a machine that never sees daylight again: it stores and gets downloaded.

The short answer

If knowing where it is, how many hours it has done and what it burns is enough, and your machine already provides it, start there. If you want to know what happened, at what time and how it was being used, you need your own. And most people end up combining both.

Side by side

ManufacturerIndependent
What it measuresWhat they decide.Practically whatever you want.
Getting startedUsually factory-fitted.Has to be fitted and tested.
Several brandsOne portal per brand.All in one place.
Older machinesOften nothing.Can be retrofitted.
No coverageDepends on the system.Designed for it.
HistoryWhatever they keep.Yours, and you keep it.
Main riskDepending on their terms.A poor installation.

What you can measure with your own

Practically whatever you want. What changes is how it’s done, which is why no two integrations are alike:

  • What the machine already knows. Read from its own signals: temperatures, pressures, fault codes.
  • What it doesn’t know. Add a sensor: vibration, a specific pressure, electrical consumption.
  • What happens around it. Measured outside: for example, how power reaches the machine.

Start with the question, not the sensor: what do you want to be able to know? That tells you what to measure. There are examples in what to measure with machinery telematics.

No coverage, and never coming out

It’s designed around where the machine works. There are three levels:

  1. With a network: it sends data and alerts straight away.
  2. With a network at times: it stores and sends what’s pending when it connects.
  3. Never a network: it stores and someone downloads the data in person. It works even if that machine never sees daylight again.

We explain it applied to machinery in tunnels and mining.

What changes: being able to say when

A summary tells you the machine broke down. Your own record tells you that early on Tuesday it ran for 40 minutes above the recommended temperature, and nobody stopped. These are examples, but that’s the difference:

  • If it was misused, you see when, at what time and for how long.
  • If you give a warranty or hire out, you know how the machine was treated, without relying on what you’re told.
  • If it’s your machine, you fix the cause before it becomes a breakdown. That’s what saves most.

More in alerts and manufacturer limits.

Five questions before deciding

  1. How much does a breakdown hurt? Even one machine can pay off, if it’s expensive or a stoppage holds up your work.
  2. What do you need to see that you can’t today? If the manufacturer already gives it to you, don’t measure it twice.
  3. Who uses it? If others do, through a sale with warranty or hire, you’ll want your own record.
  4. Where does it work? In a tunnel or a mine, coverage changes everything.
  5. Do you have several brands or older machines? Then one portal won’t give you the full picture.

The standard for combining brands

There’s the ISO/TS 15143-3 specification, known as AEMP 2.0, for exchanging construction machinery data in one format. It helps combine brands, with two limits: it gives a basic set of data, such as location, hours or fuel, and access depends on each manufacturer and your subscription.

What usually works: combining

Use what the machine already provides, measure what’s missing and see it all in one dashboard. What matters isn’t where the data comes from, but that it’s together, in order and yours. It’s what we do in remote machinery monitoring.

Sound familiar? See how we solve it in remote machinery monitoring or tell us about your case directly.

Tell us about your case↗

Questions,
on the table.

What is independent telematics?

Telematics that doesn’t depend on the machine’s manufacturer: your own gauges and control unit, or a system that brings several brands together.

What can be measured?

Practically whatever you want: what the machine already knows, what a sensor can measure and what happens around it. Depending on what you need, one integration or another is built.

Does it work if the machine never has coverage?

Yes. It stores the data and it’s downloaded in person. What you won’t get in that case is remote alerts in the moment.

Is it worth it for one machine?

It can be, depending on what it’s worth, what a stoppage costs and what you need to see or prove.

What is ISO 15143-3 or AEMP 2.0?

A specification for exchanging telematics data from construction machinery in a common format. It makes combining brands easier, but access and data depend on each manufacturer.

Do I lose the warranty if I fit gauges?

It depends on the machine, how it’s fitted and the manufacturer’s terms. Check before fitting anything, especially if it’s under warranty or hired.