The machine stores almost nothing.
Many parameters are monitored in the moment and lost. By the time you look, nothing’s left.
Underground, hardly anyone sees what’s happening to the machine. We record its data on the machine itself, with date and time, with no network needed. So you know what happened, whether there was misuse and who has to pay for the breakdown.
Read pressures, voltages, starts and whatever you need on the machine.
Processes and stores the data on the machine, with no network needed.
Over the network with a connection. If not, downloaded in person.
The data goes straight in, with date and time, and gets analysed.
All machines together, of any brand.
Compares with the manufacturer’s limits and your own.
Many parameters are monitored in the moment and lost. By the time you look, nothing’s left.
Telematics that needs coverage goes silent exactly where the machine works.
The operator, the workshop and the customer tell you different things, and there’s no data to check it.
At a face, if one machine stops, what comes behind it can stop too.
The history shows when the machine was used outside the manufacturer’s limits or what was agreed in the contract. It’s useful in any of these cases:
If the machine is used outside what was agreed or without following the manufacturer, you can see what happened before paying for the repair.
You know how it comes back and why: real hours and limits exceeded, not just how it looks.
A contract sets a condition on delivery or return. With the history, it’s compared with facts.
You see how the machine has been treated during the warranty and have your own data if you need to claim.
If it breaks, you know whether it was the part, the maintenance or the way of working, and you correct it.
It worked for 40 minutes above the recommended temperature, without stopping.
Four start attempts in a row with the battery below its minimum.
It went past its service hours. The alert was sent and recorded.
It kept working with oil pressure below the minimum.
These are examples. What counts as misuse is set by the manufacturer and your contract: that’s why it’s worth putting in writing what’s measured and what for.
It doesn’t need a network to record. Each reading keeps its date and time.
If it gets a connection back, it sends what’s pending and the history stays complete.
If that machine will never see daylight, the data is downloaded in person.
A remote alert needs a connection at that moment. Without one, you see it as soon as the data arrives. That’s why it’s designed for each site.
The system only reads signals. It changes nothing on the machine.
When the data is sent or downloaded, it goes straight into the program. It’s not just a database: it’s a complete program that analyses everything.
It reviews all the data from each machine: what happened, when and for how long.
Hours, fuel, breakdowns, machines and sites against each other, to see what one reading alone doesn’t show.
Charts, comparisons and summaries by machine, by site or by date.
Reports and data can be exported to use wherever you want.
The data is yours and only the people you authorise get in.
These are examples. Whatever has a signal gets measured, and what doesn’t gets a sensor. If you already have manufacturer telematics, you can combine it with your own.
Where each unit goes, how it’s protected, where it gets power and how the data gets out are decided and tested before fitting.
If your site requires certified equipment, for example for explosive atmospheres, tell us at the start. Not everything will do, and we won’t promise what can’t be installed.
Alerts with the manufacturer’s limits or your own, before it stops.
Services according to what it has really worked, connected to your maintenance software.
With real hours and consumption, you can work out the cost per hour.
The control unit stores the data on the machine itself. With a connection, it sends them. Without one, they’re downloaded in person. Each reading keeps its date and time.
Yes. It tells you how the machine was used, when limits were exceeded and whether a service alert was sent. That’s information you wouldn’t otherwise have.
It gives you dated data, independent of what you’re told. What it’s worth in a claim depends on the case and the contract. So it’s worth putting in writing what’s measured and why.
No. It’s a complete program. The data goes straight in and the program analyses it, cross-references it, generates reports and lets you export them.
A remote alert needs a connection at that moment. Without one, the event stays recorded and shows up as soon as the data arrives.
No. We don’t do teleoperation. We only read signals and show what’s happening. The machine is run by its operator.
Yes. We bring in manufacturer data where possible and, where there’s none, fit gauges and a control unit. It all ends up in one dashboard.
Yes. It’s the same system, and with more coverage it’s usually simpler.
It depends on the site and what it requires. That has to be checked before anything is fitted. Tell us at the start and we’ll say clearly what can be done.
It depends on the number of machines, the hardware and how the data gets out. We start at €4,000 and the price is fixed after the diagnosis.
With that, in a 15 to 30 minute call we’ll see what can be measured and how to get the data out.
Tell us about your case↗Then a diagnosis and a fixed price. From €4,000, VAT included. Code, data and documentation are yours. No lock-in.